Custom Trouser Manufacturer
Tailored, pleated, wide-leg, chino and denim trousers for womenswear and menswear — patterns fitted in movement and shrinkage built in before bulk.

A trouser is judged at the rise.
The rise, the seat and the crotch curve decide whether a trouser is worn or returned. They cannot be checked on a hanger, so MANLOR fits trousers on a live model sitting, walking and bending — and records each comment against a point of measure.
The second risk is fabric. A wool or linen trouser that shrinks in length after pressing or washing turns an approved fit into a reject, so shrinkage is tested on each bulk fabric lot and built into the bulk pattern before cutting.
Trousers we develop.
-
01
Tailored & pleated trousers
Single and double pleats, extended waistbands and side-adjusters, in wool suiting and flannel.
-
02
Wide-leg & fluid trousers
Crepe and viscose trousers with controlled drape and clean waistband finishing.
-
03
Chinos & cotton twill
Flat-front and pleated chinos with garment-wash options.
-
04
Denim & jeans
Straight, wide and tapered jeans with wash development on the proto.
-
05
Shorts & skirts
Tailored shorts and skirts cut from the same trouser fabrics and blocks.
What we fix before bulk.
| Point | Typical risk | How it is controlled |
|---|---|---|
| Rise & crotch curve | Pulling when seated, excess fabric at the seat | Fitted on a live model in movement; curve corrected in CAD |
| Waistband | Rolling, gaping at the back | Construction specified per style: curtained, extended tab or elastic back |
| Length after washing | Short inseam in bulk | Shrinkage tested per bulk lot and added to the pattern |
| Pleats & creases | Pleats opening, creases drifting | Pleat depth in the spec; pressing standard set by the sealed sample |
| Leg twist | Side seam rotating after washing | Grain checked at cutting; wash test on the proto |
Trouser standards.
Fitted in movement
Rise and seat checked sitting, walking and bending, not only standing.
Shrinkage in the pattern
Each bulk fabric lot is tested and the pattern adjusted before cutting.
Matched to the jacket
Suit trousers cut from the same lot as the jacket and shade-banded together.
Developed at MANLOR.
Starting points for your own development — every style is adapted in fabric, fit and detail. Each card is a crawlable path into the library.
Recommended qualities.
Reference fabrics from our library — or develop your own.
Custom fabric developmentTrousers FAQ.
Do you make both women's and men's trousers?
Yes. Women's and men's trousers are drafted on separate blocks — different rise, seat and waist-to-hip ratios — by the same pattern room.
Can trousers be matched to a jacket?
Yes. Suit trousers are cut from the same fabric lot as the jacket and shade-banded together, and can also be ordered as separates.
How do you stop trousers shrinking in bulk?
Shrinkage, including steam pressing, is tested on each bulk fabric lot and built into the bulk pattern before cutting.
What is the MOQ for custom trousers?
MOQ is confirmed per style, fabric and colour count before sampling; current policy is on our factory facts page.
Go deeper.
Fit Approval & Measurement Control
Fit is decided in the pattern room and protected on the production line. Measurement control is how the fit you approved becomes the fit your customers receive.
Read the guideGuide · 8 min readHow Clothing Manufacturer MOQ Works
A manufacturer's MOQ is rarely arbitrary. It is the quantity at which fabric minimums, line set-up and sampling cost make a style viable. Understand the drivers and you can plan around them.
Read the guideSoft TailoringSoft Tailoring
Soft tailoring manufacturer in China and unstructured jacket manufacturer for menswear brands — unstructured and half-lined jackets, relaxed suits and pleated trousers.
ExploreDevelop your collection.
Send sketches, references or tech packs — our development team replies with questions, fabric options and a sampling plan.
What are you looking to develop?
Develop Your Trousers




