What drives MOQ
MOQ is usually quoted per style per colour, because each colour is a separate fabric dye lot and a separate cutting run.
| Driver | Why it raises MOQ | How to plan around it |
|---|---|---|
| Fabric minimum | Mills and dye houses set minimum metres per colour for custom qualities | Use stock or greige-stock fabrics; share one fabric across several styles |
| Colour count | Each colour is a separate dye lot and cutting run | Launch with fewer colours; add colours on re-order |
| Construction | Complex styles need longer line set-up and more operator training | Keep first-season constructions simpler; add detail once a style sells |
| Trims | Custom buttons, zips and labels have their own minimums | Use stock trims for launch; brand trims later |
| Size range | A wide size range spreads quantity thinly per size | Concentrate the first order in core sizes |
How fabric turns into MOQ
The arithmetic is simple: divide the fabric minimum by the fabric each garment consumes. As an illustration, if a mill's minimum for a custom colour is 300 metres and a long coat consumes about 2.5 metres, the fabric alone sets a floor of roughly 120 coats in that colour — before any production consideration.
Why wool coats run higher
Wool coats combine the two most demanding constraints: specialised coatings with mill minimums, and long, operation-heavy construction. A tailored coat involves interlinings, linings, shoulder shaping and extensive pressing, so line set-up is significant.
- Coating fabrics are usually developed or dyed to order
- High fabric consumption per garment
- Interlining, lining and trims each carry minimums
- Double-faced wool requires hand-finished edges
Why knitwear runs higher
Knitwear minimums are often set by yarn rather than fabric. Yarn is dyed in lots, and fully fashioned knitting requires programming the machine for each style and gauge. Cut-and-sewn knits depend on the knitted fabric minimum instead.
- Dyed yarn minimums per colour
- Machine programming per style and gauge
- Sampling on the production gauge
- Washing and finishing tests per yarn
How to plan a first order
Plan the range around shared fabrics and a short colour palette, confirm MOQ per style in writing before sampling, and keep a re-order plan ready for styles that sell through.
Frequently asked questions
How does fashion clothing MOQ work?
A clothing MOQ is set by the largest of three constraints: the fabric or yarn minimum, the set-up cost of the sewing or knitting line, and the development cost spread across the order. It is usually quoted per style per colour. Stock fabrics allow smaller runs; custom-dyed cloth, wool coatings and knitwear yarns usually need more. MANLOR confirms the figure per style in writing rather than publishing one number for every product.
Is MOQ per style or per order?
Usually per style per colour, because each colour is a separate dye lot and cutting run. Some manufacturers also set a minimum total order value.
Can I order less than the MOQ?
Sometimes, using stock fabrics or by paying a surcharge that covers the fabric minimum or set-up cost. Ask for the condition behind the MOQ — it shows what can be adjusted.
What is MANLOR's MOQ?
MANLOR confirms MOQ by style, fabric, colour count and construction, in writing, before sampling. Current policy is published on the MANLOR factory facts page.