Quality Guide

Fit Approval & Measurement Control.

Fit is decided in the pattern room and protected on the production line. Measurement control is how the fit you approved becomes the fit your customers receive.

MANLOR Development Team · 4 October 2026 · 7 min read

What fit approval means

Fit approval is the written sign-off that a sample's fit, balance and measurements are correct, so the pattern can move to the next stage. In garment manufacturing it happens more than once: the base-size fit sample, the size set, and the sealed pre-production sample each need their own approval, and each approves something different.

What each fit approval signs off
ApprovalSampleWhat is signed off
Base fitFit sample in the base sizeBalance, ease, proportion and measurements against the spec
GradingSize setGrade rules and proportion across the size range
Bulk standardSealed PP sample in bulk fabric and trimsFinal fit, construction and finish that bulk is inspected against

Approve in writing, with numbered comments and photos, so the next round answers every point.

Points of measure and tolerances

Every point of measure (POM) needs a how-to-measure description and a tolerance. Without tolerances, an inspector cannot decide whether a measurement passes.

Common starting tolerances for woven fashion garments
Point of measureTypical tolerance
Chest / bust (½)± 1.0 cm
Waist (½)± 1.0 cm
Hip (½)± 1.0 cm
Body length± 1.0 cm
Sleeve length± 1.0 cm
Shoulder width± 0.5 cm
Collar / neck± 0.5 cm
Hem sweep (½)± 1.5 cm

Starting points only. Knitwear and stretch fabrics usually need wider tolerances; set yours per style in the spec.

From base size to size set

Fit is approved on the base size first, on a form and a live fit model. Grade rules then scale the pattern across sizes, and a size set — one sample in each size, or at least the smallest and largest — confirms the grading before bulk.

  • Fit sessions with photos and written comments
  • Grade rules per POM
  • Size set measured against the graded spec

Shrinkage: the hidden fit risk

A fabric that shrinks 3% in length can turn an approved trouser into a reject. Test shrinkage on each bulk fabric lot, including steam pressing, and adjust the pattern before cutting.

Inline and final measurement

Measure during production, not only at the end. Inline checks at cutting and after key sewing operations catch drift while it can still be corrected.

  • Cut-panel checks against pattern
  • Inline measurement after assembly
  • Final measurement on an AQL sub-sample

Frequently asked questions

How do I control fit and measurement in garment production?

Approve a base-size sample against a measurement spec with a tolerance for every point of measure, confirm the grade rules on a size set, build fabric shrinkage into the pattern, and measure garments inline during sewing as well as at final inspection. Most bulk fit problems come from untested shrinkage, missing tolerances or grading that was never checked.

How many fit samples are normal?

One or two fit rounds after the proto is typical for a new premium style; complex tailoring may need more.

What is a size set?

A set of samples in each size, or in the smallest and largest sizes, used to confirm that grading is correct before bulk production.

Who provides the measurement spec?

The brand in an OEM project; the manufacturer's pattern room can create it in an ODM or private-label project for the brand to approve.

Start a Related Project

From the Journal

Start a related project.

Put this guide into practice — share your brief and our development team will reply with next steps.

What are you looking to develop?

Start a Related Project