OEM Manufacturing

OEM Clothing Manufacturer

You have the design and the specification. We source to your standard, sample to your measurements and produce to your sealed sample.

Sewing floor with an overhead hanging production system and line-control workstation
Minimum order
150 pcsper style, per colour · 100 pcs per colour on selected stock fabrics
First sample
9–12 daysUSD 60–140 per sample · refunded or credited on bulk
Bulk production
25–35 daysafter PPS approval, bulk fabric in house and deposit received
Compliance
BSCI rating CTÜV Rheinland · valid until 30 December 2026

FOB, EXW or DDP · 30% deposit with the order, 70% balance at shipment (T/T); L/C available for key accountsAll factory factsConfirm for your style

What OEM means here

Your design, made to your standard.

OEM — original equipment manufacturing — means MANLOR produces your design to your specification. You own the design, the tech pack and the size chart. We source fabric and trims to your standard, cut the pattern from your measurements, sample, and run bulk against a sealed pre-production sample. Nothing about the style changes without your written approval.

Our OEM work covers premium womenswear and menswear: blazers and soft tailoring, wool and faux-leather outerwear, woven dresses, trousers and skirts, shirts, polos and knitwear. Pattern making, grading, cutting, sewing, pressing and quality control run in-house at our factory in Baiyun District, Guangzhou, with a team of 100+.

OEM orders start at 150 pieces per style, per colour, so a first drop can be two or three colourways of one style rather than thousands of units. Re-orders run from the same approved pattern and sealed sample, so the second and third production match the first.

How it works

Clear roles, clear results.

You provide

  • Complete tech pack with construction details
  • Graded size specification
  • Fabric, trim and colour standards
  • Labelling and packaging artwork

MANLOR handles

  • Fabric and trim sourcing to specification
  • Pattern making from your spec or base sample
  • Proto, size-set and pre-production samples
  • Bulk production with inline and final QC

You receive

  • Samples measured against your spec
  • Bulk production matching the sealed sample
  • Inspection report before shipment
  • Export documentation

OEM timeline and costs.

Every stage, with the published figure that applies.

StageWhat happensTime / cost
Tech pack reviewConstruction, measurements, bill of materials and target price checked; open points listed in writingBefore quotation
Fabric and trimsSourced to your standard from stock qualities, or developed with a millCustom fabric: mill minimum 800–1,300 m per colour
First samplePattern cut from your specification and sewn in available or approved fabricUSD 60–140 per sample · 9–12 days
Fit and size setFit comments logged, CAD pattern corrected, graded sizes measured against your chartAgreed per style
Pre-production sampleMade in bulk fabric and trims, approved and sealed as the production standardSample fee refunded or credited on bulk
Bulk productionCutting, sewing, inline checks, pressing, finishing and packing25–35 days · from 150 pcs per style, per colour
Inspection and shippingFinal inspection at AQL 2.5 for major defects and 2.0 for minor defects; export documents preparedFOB, EXW or DDP · 30% deposit, 70% at shipment

Days are calendar days. Bulk time counts from the last of PPS approval, bulk fabric in house and deposit received.

Before you send a tech pack

What makes an OEM order run smoothly.

Most delays in OEM production come from gaps in the specification, not from the sewing floor. We review every tech pack before quoting and send back a written list of open points — missing tolerances, unconfirmed trims, an unclear wash or finish — so they are fixed before the first sample rather than discovered at bulk.

If your tech pack is incomplete, we can finish it: our pattern room drafts in CAD, grades the size run and exports DXF files you keep. If you only have a reference garment, we draft patterns to match it and confirm any differences in fabric or construction before sampling.

At final inspection, bulk is checked against the sealed sample at AQL 2.5 for major defects and 2.0 for minor defects. Brand QC visits and third-party inspection are welcome, and the inspection report is shared before the balance is paid.

Questions

OEM Manufacturing FAQ.

ODM DevelopmentPrivate Label
What should an OEM tech pack include?

Flat sketches, construction and stitching details, a graded measurement chart, bill of materials, colourways, and labelling and packaging instructions.

Can you match an existing sample?

Yes. Send the reference garment and we will draft patterns to match, then confirm any differences in fabric or construction before sampling.

Do I keep ownership of my designs and patterns?

Yes. Your designs, tech packs and patterns remain yours and are never offered to other clients. We sign a mutual NDA on request before you share files, and DXF pattern files can be exported for you.

What quality standard is used for OEM bulk?

Bulk is checked against the sealed pre-production sample at five quality gates, ending with final inspection at AQL 2.5 for major defects and 2.0 for minor defects. Brand QC and third-party inspection are welcome.

What information do you need for an OEM quotation?

The tech pack or reference garment, target fabric and composition, quantity per style and colour, size range, target price and delivery date. With those, we return a costed quotation and a written list of any open points in the specification.

What is the minimum order quantity for OEM clothing manufacturing?

150 pieces per style, per colour; 100 pcs per colour on selected stock fabrics. Custom-dyed or custom-woven fabric adds the mill minimum of 800–1,300 m per colour at the mill. The MOQ for your styles is confirmed in writing before sampling.

How much does sampling cost for OEM clothing manufacturing, and how long does it take?

Sample fees: USD 60–140 per sample, depending on style complexity. The first sample takes 9–12 days once the brief and fabric direction are confirmed. The sample fee is refunded, or credited against the bulk order, once bulk is placed.

What is the production lead time for OEM clothing manufacturing?

Bulk takes 25–35 days, counted from the last of PPS approval, bulk fabric and trims passing inspection, and deposit received. Trade terms: FOB, EXW or DDP. Payment: 30% deposit with the order, 70% balance at shipment (T/T); L/C available for key accounts.

OEM Manufacturing

Send us your tech pack.

We review construction, materials and measurements, then reply with questions, a sampling plan and indicative pricing.

What are you looking to develop?

Send a Tech Pack