Production Guide

Woven vs Knitwear Manufacturing.

Wovens and knitwear are developed in fundamentally different ways. Planning them as one process is a common cause of missed dates and fit problems.

MANLOR Development Team · 4 October 2026 · 7 min read

Side-by-side comparison

How woven and knitwear development differ
WovenKnitwear
Starting materialFinished woven fabricYarn (fully fashioned) or knitted fabric (cut and sewn)
Key specificationComposition, weight, weave, finishYarn count, composition, gauge, stitch structure
Pattern workPaper or CAD pattern with ease and grainKnitting program per gauge, or pattern allowing for stretch
Main fit riskShrinkage and fabric behaviourRelaxation, growth and spirality after washing
MOQ driverFabric minimum per colourDyed yarn minimum per colour
Typical tolerancesTighter (about ±1 cm on body)Wider (about ±1.5–2 cm on body)
QC focusSeams, pressing, shade, measurementPilling, dimensional stability, linking, measurement

Tolerances are common starting points; set them per point of measure in your spec.

Developing wovens

Woven fabrics do not stretch to forgive a pattern, so grain line, ease and seam allowance must be right. Each fabric lot should be shrinkage-tested and the result built into the pattern before bulk cutting.

  • Shrinkage test per fabric lot
  • Seam type chosen for fabric weight
  • Pressing standards fixed on the PP sample

Developing knitwear

In fully fashioned knitwear the panels are knitted to shape, so the knitting program is the pattern. Gauge — needles per inch — determines weight and handfeel, from chunky 3–7 gauge to fine 12–16 gauge. Every new yarn needs a wash test before measurements are signed off.

  • Yarn and gauge confirmed before sampling
  • Wash and relaxation test on the sample
  • Linking quality on necklines and shoulders

Planning a mixed collection

Start knitwear development earlier than wovens, approve yarn colours alongside fabric lab dips, and keep separate tolerance tables for the two categories.

Frequently asked questions

Is knitwear more expensive to develop than wovens?

Often, at the start. Yarn sourcing, machine programming and wash testing add development time, while repeat orders on an established program are efficient.

What gauge should I choose for premium knitwear?

Fine gauges (12–16) suit lightweight merino and layering pieces; mid gauges (7–9) suit everyday sweaters; chunky gauges (3–5) suit textured outerwear knits. Choose by handfeel, season and yarn.

Can one manufacturer make both wovens and knitwear?

Yes, if it has both a woven sewing operation and knitting capability or established knitting partners. Ask which are in-house.

Start a Related Project

From the Journal

Start a related project.

Put this guide into practice — share your brief and our development team will reply with next steps.

What are you looking to develop?

Start a Related Project