Production Guide

How to Develop a Wool Coat.

A wool coat fails in the hang and in the cloth, not in the sketch. Start early, approve the coating before the pattern is finished, and seal a sample in bulk fabric.

MANLOR Development Team · 6 October 2026 · 8 min read

Start from the delivery date

Outerwear has the longest fabric lead time in a collection. For an autumn/winter delivery, concept and fabric need to start about nine to twelve months earlier. A coat begun when the rest of the collection is already in fit will be waiting on cloth.

  • Delivery date and sales window
  • Target retail price
  • Quantity per colour, even if it is a range
  • Reference coat, sketch or tech pack

Choose the cloth before the pattern is finished

The pattern consumes the fabric, and the fabric changes the pattern. A double-faced wool that will be worn unlined needs hand-finished edges and no lining allowance. A melton overcoat needs interlining, lining and a shoulder that can carry the weight. Changing cloth after fit approval usually means a new fit round.

Common coating routes
ClothWhat it asks of the coatWatch for
Double-faced woolUnlined, edges separated, turned and slip-stitched by handEdge bulk, and a mill minimum per colour
Melton or wool blendLined body, interlining, shoulder and hem balanceWeight pulling the front or the hem
Custom coatingWeight, blend and colour developed with a millLab dips and a longer lead time than stock cloth

Fit the hang, not only the measurements

A coat is accepted or rejected by how it hangs: shoulder, front edge, vent and hem. Measure it against the spec, then look at it on a form and on a person standing and walking. Check matching on checks at the front, pockets, sleeves and centre back before the size set.

  • Balance of shoulder, front and hem
  • Sleeve pitch and vent
  • Lining not pulling the shell
  • Check match specified in the marker

What has to be true before bulk

Bulk cutting should wait until three things are done: the pre-production sample in bulk fabric and trims is approved and sealed, the bulk cloth and trims have been checked, and the quantity is confirmed against the mill minimum. Inspection of the bulk is then against that sealed sample.

Frequently asked questions

How do I develop a wool coat with a Chinese manufacturer?

Start nine to twelve months before delivery. Agree the coating first, fit the coat for balance as well as measurements, and do not cut bulk until a pre-production sample in the bulk cloth is sealed. Confirm the mill minimum per colour in writing before you commit the range.

Do women's and men's coats share a pattern?

No. They can share a factory and a finishing standard, but the blocks differ in shoulder, chest and sleeve pitch. A men's coat resized from a women's block will not hang.

Why do wool coat quantities run higher?

Coating mills set a minimum per colour, a coat uses more metres than any other garment in the collection, and the construction takes longer to set up. The arithmetic is in our guide to how fashion MOQ works.

Start a Related Project

From the Journal

Start a related project.

Put this guide into practice — share your brief and our development team will reply with next steps.

What are you looking to develop?

Start a Related Project