Fabric Guide

How to Brief Linen Apparel Production.

Linen sells on a dry hand and a lived-in crease. Brief the factory for that behaviour — or you will fight the cloth through every sample round.

MANLOR Development Team · 17 October 2026 · 8 min read

Say what “linen” means in the brief

Pure linen, linen-cotton and linen-viscose behave differently in wash and crease. Write the blend on the brief. “Linen look” polyester is a different product — name it if that is what you want.

What to put in a linen brief
ItemSpecifyIf you skip it
Fibre100% linen / linen-cotton % / linen-viscose %Wrong handfeel and wrong care label
Weightgsm or oz targetProto too light or too boardy
WashUnwashed, soft wash, or garment washBulk arrives with unexpected softness or colour loss
CreaseAccept natural crease / steam only / performance finishEndless “make it not wrinkle” comments
LiningUnlined, partial, full — and lining fibreShell and lining shrink apart

Crease is a feature until you deny it

Do not ask the factory to make linen “never crease” without a performance finish and a price that supports it. Most contemporary linen programmes sell the crease. Brief the expected look after a day’s wear; otherwise fit sessions waste rounds on pressing that will not survive shipping.

Shrinkage and twist before grading

Wash and steam-test the bulk candidate before you lock the graded spec. Linen can move several percent; twist in trousers shows as a twisted side seam after wash. Build the allowance into the pattern, then confirm on a washed size set.

Sample cloth vs bulk cloth

Market linen used for proto is rarely the same lot as bulk. Approve handfeel and colour on the bulk mill lot. If the season is late, either accept the difference in writing or delay — do not pretend the proto was the standard.

When not to choose linen

If the brand promise is sharp press and zero crease in a humid market, choose a different cloth. If the calendar cannot absorb wash tests before size set, start with a resolved private-label block in a known linen-cotton from the linen range rather than a new mill development.

Frequently asked questions

How do I brief a manufacturer for linen clothing?

State fibre blend, weight, wash intent, crease expectation and lining. Require wash shrinkage and twist tests before the size set, and approve bulk handfeel on the bulk cloth rather than on a market proto.

Will linen always crease?

Natural linen creases. Finishes and blends can reduce crease; they change handfeel and cost. Brief the look you want after wear, not an absolute “no crease” unless a finish is specified.

Can linen share a dye lot across styles?

Yes — and it should. Mill minimums are per colour. A shirt and a trouser in the same quality keep the season coherent and the quantity workable.

Start a Related Project

From the Journal

Start a related project.

Put this guide into practice — share your brief and our development team will reply with next steps.

What are you looking to develop?

Start a Related Project